The Series 6 (CS-6) pump will solve your precision pumping needs for flowrates from 0 -2600ml/hr. The 6mm rotor carries 3 cavities each with a volume of 24µl. This in-line pump features barbed connectors to attach tubing to the inlet and outlet. Alternatively, Quantex can provide a unique single-use pump connector to suit the customer’s dispense system. It can be used in the medical, food, beverage, consumer and industrial markets. A micro evaluation kit consisting of a stepper motor, controller, easy to use software, chassis and drive shaft is available to allow in-house evaluation.

To evaluate the technology and choose the best configuration for your application, evaluation kits consisting of a motor, custom controller, easy to use software and step-by-step instructions are available. See the documents below for the full range of pump and evaluation kit specifications.

The Series 13 (Qx-13) disposable pumps produce a flow range of 0-6.3ml/s. The 13mm rotor can have either 2 or 3 cavities which dispense 0.28ml and 0.21ml per cavity respectively. The standard fluid contacting materials are polypropylene, HDPE and Nitrile. Alternative materials are possible to suit your liquids. The disposable pumps are available in high pressure and low pressure configurations along with an in-pump dilution option.

To evaluate the technology and choose the best configuration for your application, evaluation kits consisting of a motor, custom controller, easy to use software and step-by-step instructions are available. See the documents below for the full range of pump and evaluation kit specifications.

The Series 19 pump has a flowrate of 0-15ml/s at 10RPS. Depending on the application, up to 20ml/s can be achieved by running the pumps at 13.3RPS. The BiB-19 is a direct replacement for a gravity fed wine tap – its inlet is compatible with a 1? gland on a BIB (bag in box). The 19mm rotor carries 2 cavities each with a resolution of 0.5ml. A range of pump configurations provide in-pump dilution, valves and mixers on the outlet. Low pressure and high pressure pumps are also available.

To evaluate the technology and choose the best configuration for your application, evaluation kits consisting of a motor, custom controller, easy to use software and step-by-step instructions are available. See the documents below for the full range of pump and evaluation kit specifications.

The Series 20 pump has a flowrate of 0-27ml/s at 10RPS. Depending on the application, up to 30ml/s can be achieved by running the pumps at 11RPS. The 20mm rotor carries 2 cavities each with a resolution of 1.35ml. A range of pump configurations provide in-pump dilution, valves and mixers on the outlet. Low pressure and high pressure pumps are also available. LR-20 Dilution pumps can manage any dilution ratio from 1:1 to 1:30 where the concentrate flow rate is up to 27ml/s. The diluent flow rate is controlled by pressure regulation and a custom orifice moulded into the pump.

To evaluate the technology and choose the best configuration for your application, evaluation kits consisting of a motor, custom controller, easy to use software and step-by-step instructions are available. See the documents below for the full range of pump and evaluation kit specifications.