Masterflex I/P Series Pumps - Flow Rates to 17LPM


Masterflex® manufactures a broad range of peristaltic pumps ideally suited for many biopharmaceutical process and laboratory applications.

Product Features:

  • High volumetric efficiency allows operation in metering
  • Pump flow rates from 0.1 lpm to 37lpm
  • Masterflex pumps have no seals in contact with the medium pumped
  • Broad selection of Masterflex tubing for biopharmaceutical pump applications
  • The pumps have no valves to clog
  • Masterflex Pumps are capable of running dry with and pumping fluids with high quantities of entrained air
  • Multi-Channel models for low pulsation requirements
  • P/S and B/T Series Masterflex pumps have a choice between Easy-Load and High Perfomancne Pump Heads
  • A wide choice of Masterflex pump tube matierials including, C-Flex, platinum cured silicone, Tygon and Pharmed

Masterflex I/P Industrial Process Pump

  • Reversible, maintenance-free brushless motor with precise PWM control via a digital signal processor (DSP)
  • Digital display of flow rate, dispense volume/cumulative amount per dispense, copy, and pump motor RPM
  • Calibrate in system for accurate flow rate display
  • Keypad lock feature prevents accidents or tampering
  • Remote control of flow speed (4 to 20 mA), direction, on/off, and tachometer output
  • The Masterflex I/P process pump has a completely sealed 316 stainless steel enclosure and is NEMA 4X (IP66-rated) for protection from tough process environments.

Masterflex I/P Industrial Process Pump

Masterflex I/P Multichannel Pumps

  • Convenient three- and four-channel fixed-speed pumps come complete with pump heads, tubing, and drive
  • Multiple channels increase flow rate, or pump different fluids simultaneously from a single drive
  • Accept any Masterflex® tubing formulation — configure for a broad range of applications, including pumping multiple lines of inks, chemicals, and pharmaceuticals
  • Change flow rate by changing tubing size
  • Easy-to-clean, IP55-rated housing — simply hose down after use
  • Combination on/off/reverse switch — purge before or after pumping; pump fluid in either direction

Masterflex I/P Multichannel Pumps

Masterflex I/P Washdown Modular Pump Systems

  • Deliver flow rates from 0.12 to 17 LPM (0.03 to 4.5 GPM) with Masterflex® I/P® pump heads
  • Wide flow control range (over 30:1 turndown)
  • Reversible motor allows pumping in either direction for easy purging
  • Wall-mount controller features a NEMA 13 (IP55) enclosure; motor features a NEMA 4 (IP56) enclosure
  • Manual controls on front of the controller
  • Single-turn, solid-state potentiometer

Masterflex I/P Washdown Modular Pump Systems

Masterflex I/P Digital Metering Pump Systems

  • Modular design lets you place system components where they are most convenient
  • Deliver flow rates from 0.12 to 17 LPM (0.03 to 4.5 GPM)
  • Digital readout displays exact flow rate, dispense volume, copy number, or drive rpm.
  • Store one calibration value per tubing size
  • Calibrate in system for accurate flow rate displa
  • y
  • Reversible motor allows pumping in either direction or purging when changing tubing
  • Both wall-mount controller and separate pump motor are washdown, IP56 rated provides protection in harsh environments

Masterflex I/P Digital Metering Pump Systems