Parker thermal management hose for data center liquid cooling

Parker Thermal Management Hoses

Manufacturer

Parker

Parker thermal management hoses carry coolant through data center liquid cooling systems, from small server blade lines to large-bore suction and discharge hose. The line includes Push-Lok hose for barb-and-clamp connections, crimp-fitted hose, and E-Z Form hose that bends tightly without kinking, so coolant lines route through crowded racks without preformed hose or bent metal tube.

The hoses are built for DI water and glycol-based coolants, with peroxide-cured EPDM tubes and UL94 flame ratings. Holland can help you choose the hose, fittings and assemblies for your server, rack and CDU connections.

ADDITIONAL INFORMATION

  • Hose series for server blades (629), general liquid cooling (627), Push-Lok barb connections (807/807XT), tight-bend E-Z Form hose (7390, 7395) and large-bore suction and discharge (7391)

  • Peroxide-cured EPDM tubes for DI water and glycol-based coolants

  • E-Z Form hose bends tightly without kinking, replacing preformed hose and bent metal tube

  • Wire helix on E-Z Form and 7391 hose for full suction and vacuum service

  • Hose barb and clamp, Push-Lok and crimp fitting options

  • Sizes: -3.5 through -48, plus 4 in. and 6 in. on select series

  • Working pressure: up to 150 psi (10.3 bar), depending on series and size

  • Temperature range: up to -50°F to +257°F (-45°C to +125°C), depending on series

  • Flame rating: UL94 V-0 on 807/807XT, 629, 7390, 7395 and 7391; UL94 HB on 627

Part of our data center hoses and Holland’s data center cooling solutions.

RELATED PRODUCTS