Variable Speed Modular

Masterflex B/T Series – Flow Rates to 37 LPM

Manufacturer

Cole-Parmer Instrument Company
Product Line

Masterflex

Masterflex® manufactures a broad range of peristaltic pumps ideally suited for many biopharmaceutical process and laboratory applications.

ADDITIONAL INFORMATION

  • High volumetric efficiency allows operation in metering

  • Pump flow rates from 0.1 lpm to 37lpm

  • Masterflex pumps have no seals in contact with the medium pumped

  • Broad selection of Masterflex tubing for biopharmaceutical pump applications

  • The pumps have no valves to clog

  • Masterflex Pumps are capable of running dry with and pumping fluids with high quantities of entrained air

  • Multi-Channel models for low pulsation requirements

  • P/S and B/T Series Masterflex pumps have a choice between Easy-Load and High Performance Pump Heads

  • A wide choice of Masterflex pump tube matierials including, C-Flex, platinum cured silicone, Tygon and Pharmed

Masterflex B/T Digital Modual Variable -Speed Pump Systems

  • Reinforced base and motor mount with return bend for easy installation
  • High-volume, high-accuracy dispensing
  • Dispense by volume or time, or pump continuously
  • Separate motor and controller by up to 25 feet for convenient operation
  • IP56-rated controller and motor protect against dust and water
  • Simple intuitive controls. Start, stop, prime, reverse, calibrate, and dispense using the sealed keypad.

Masterflex B/T Series Fixed Speed Pumps

  • Simple one-hand opening/ closing
  • Reinforced base and motor mount with return bend for easy installation
  • Fixed-speed units are ideal for economical transfer and fixed flow applications
  • Reversible motor: purge before or after pumping, pump fluid in either direction
  • IP55-rated motor—wash off dirt or debris without harming pump

Masterflex B/T Series Air Powered Pumps

  • Use in locations where electricity is unsafe or impractical
  • Simple one-hand opening/ closing
  • Reinforced base and motor mount with return bend for easy installation
  • Includes pressure regulator, oiler and filter—control your compressor air to match pump requirements
  • Pump heads require a minimum 1/2 hp motor with a maximum of 1800 rpm

RELATED PRODUCTS