Masterflex L/S Series Pumps – Flow Rates to 3.4 LPM

Masterflex L/S Series Pumps – Flow Rates to 3.4 LPM

Manufacturer

Cole-Parmer Instrument Company
Product Line

Masterflex

Masterflex® manufactures a broad range of peristaltic pumps ideally suited for many biopharmaceutical process and laboratory applications.

ADDITIONAL INFORMATION

  • High volumetric efficiency allows operation in metering

  • Pump flow rates from 0.1 lpm to 37lpm

  • Masterflex pumps have no seals in contact with the medium pumped

  • Broad selection of Masterflex tubing for biopharmaceutical pump applications

  • The pumps have no valves to clog

  • Masterflex Pumps are capable of running dry with and pumping fluids with high quantities of entrained air

  • Multi-Channel models for low pulsation requirements

  • L/S and B/T Series Masterflex pumps have a choice between Easy-Load and High Perfomancne Pump Heads

  • A wide choice of Masterflex pump tube matierials including: C-Flex, platinum cured silicone, Tygon and Pharmed

Masterflex L/S Digital Process Drive Pump

  • Flow Range 0.006 to 3400 mL/min with L/S tubing–flow rate depends on drive rpm pump head, and tubing size
  • Digital interface with graphical LCD shows pump performance and operating mode— continuous run, timed dispense, copy dispense, or volume dispense
  • Dispense by Volume in mL (0.001 to 9,999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
  • NEMA 4X (IP66) rated housing for washdown applications
  • Remote control available using analog communication—voltage, current and contact closure
  • Designed with 316 stainless steel housing—ideal for manufacturing, pharmaceutical, dairy, biotech, and food and beverage applications

Masterflex L/S Variable Speed Digital Drive with Remote I/O

  • Flow rate 0.06 to 3400 mL/min—flow rate depends on drive rpm, pump head, and tubing size
  • Three digit LED display shows motor rpm — confirm speed setting at a glance
  • Reversible motor—purge tubing before or after pumping; pump fluid in either direction
  • Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
  • Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
  • Speed control input: 4 to 20 mA or 0 to 10 VDC
  • Membrane keypad for easy up-front control of speed, direction, and start/stop

Masterflex L/S Analog Variable-Speed Console Drive

  • Flow rate 0.42 to 2900 mL/min with L/S tubing—flow rate depends on drive rpm, pump head, and tubing size
  • Simple operation with single-turn speed control
  • Separate power switch enables you to maintain speed setting when turning drive on/off; front-panel LED indicates power on
  • Reversible motor lets you easily prime/purge tubing and pump in either direction
  • Remote control of start/stop via DB9 connector on back of drive

RELATED PRODUCTS