- All
- Centrifugal Pumps
- Industry Insights
- Holland Applied Technologies
- General
- Sanitary Process Instrumentation
- High Purity Process Applications
- Sanitary Metering and Batching Systems
- Single-Use Process
- Homogenizers
- High Purity Product Features
- Pharmaceutical Filling Applications
- Sanitary Pumps
- Twin Screw Pumps
- Biopharmaceuticals
- Sanitary Surface Finish
- Custom Fabrication
- High Purity Skids & Modules
- Microfluidizers
- Sanitary Hose Assemblies
- Sanitary Process Equipment
- Sanitary PD Rotary Pumps
- Sanitary Fittings
- Sanitary Valves
- Sanitary Elastomers
February 27, 2014
One area of sanitary processing Holland has identified as a market where we can really help our customers is with complete, turnkey batch systems and basic automation. Not everyone needs an expensive and complex PLC or DCS. Pump run, valve cycling, turbidity control, and fill bowl level control are all good examples of basic functions almost every producer uses that can be readily automated to provide increased throughput and product consistency.
February 25, 2014
When specifying equipment for a new process application, it is not only important to identify pieces of equipment that protect [...]
February 24, 2014
Most sanitary gaskets come with a series of colored dots on the side of the gasket that signifies the polymer material the sanitary gasket is constructed from.
February 21, 2014
Consumers implicitly rely upon the standards put into place by governing agencies to protect the public’s health and well-being. One standard often overlooked, but usually published alongside USP Class VI, is FDA 21 CFR 177.2600.
February 18, 2014
Previous posts have been focused on sanitary positive displacement pumps, specifically Waukesha’s External circumferential piston pumps, the Universal 1 and [...]
February 17, 2014
Sanitary stainless steel manifolds are used throughout the hygienic process industry. We see them all of the time in filling/dispensing [...]
February 13, 2014
Today we will take a look at one niche area of sanitary hose, anti-static Teflon hose, by going over what static electricity is and what we do to combat it in specific applications.
February 12, 2014
At Holland, we see unique process demands from our customers every day. Whether it’s handling extremely caustic fluids or hydrocarbons, [...]
February 10, 2014
In the wine industry, low shear and gentle handling of grapes is essential. For viticulturists, gentle handling is important in [...]
February 6, 2014
What is a Food Grade Lubricant? Food grade lubricants perform the same technical functions as any other lubricant. Their job [...]
February 5, 2014
The sanitary air blow check consists of a sanitary clamp two piece body with and orifice on the product side. A rubber spring loaded stem seats in the orifice. The connection on the other end is normally either a female NPT or hose barb
February 4, 2014
In an effort to further reduce dead legs and meet the increasing demand to shrink the overall envelope of valve assemblies, sanitary diaphragm valve manufacturers developed the block body
February 3, 2014
So if you are putting together sanitary process lines that don’t require BPE type surface finishes or merely require 304 stainless steel do have to use ASME PBE fittings if you want orbital welds? Often not. We have studied standard sanitary weld fittings and hope to bring some clarity as to their suitability to be orbitally welded.
January 31, 2014
This blog post will address what animal components are used in the production of single use bioprocessing equipment, why it is important that animal derived components are avoided where possible, and what products are currently offered in ADC free versions.
January 30, 2014
One of the worst low NPSH applications is CIP return where the fluid to be pumped often has a lot of entrained air and foam.
February 27, 2014
One area of sanitary processing Holland has identified as a market where we can really help our customers is with complete, turnkey batch systems and basic automation. Not everyone needs an expensive and complex PLC or DCS. Pump run, valve cycling, turbidity control, and fill bowl level control are all good examples of basic functions almost every producer uses that can be readily automated to provide increased throughput and product consistency.
February 25, 2014
When specifying equipment for a new process application, it is not only important to identify pieces of equipment that protect [...]
February 24, 2014
Most sanitary gaskets come with a series of colored dots on the side of the gasket that signifies the polymer material the sanitary gasket is constructed from.
February 21, 2014
Consumers implicitly rely upon the standards put into place by governing agencies to protect the public’s health and well-being. One standard often overlooked, but usually published alongside USP Class VI, is FDA 21 CFR 177.2600.
February 18, 2014
Previous posts have been focused on sanitary positive displacement pumps, specifically Waukesha’s External circumferential piston pumps, the Universal 1 and [...]
February 17, 2014
Sanitary stainless steel manifolds are used throughout the hygienic process industry. We see them all of the time in filling/dispensing [...]
February 13, 2014
Today we will take a look at one niche area of sanitary hose, anti-static Teflon hose, by going over what static electricity is and what we do to combat it in specific applications.
February 12, 2014
At Holland, we see unique process demands from our customers every day. Whether it’s handling extremely caustic fluids or hydrocarbons, [...]
February 10, 2014
In the wine industry, low shear and gentle handling of grapes is essential. For viticulturists, gentle handling is important in [...]
February 6, 2014
What is a Food Grade Lubricant? Food grade lubricants perform the same technical functions as any other lubricant. Their job [...]
February 5, 2014
The sanitary air blow check consists of a sanitary clamp two piece body with and orifice on the product side. A rubber spring loaded stem seats in the orifice. The connection on the other end is normally either a female NPT or hose barb
February 4, 2014
In an effort to further reduce dead legs and meet the increasing demand to shrink the overall envelope of valve assemblies, sanitary diaphragm valve manufacturers developed the block body
February 3, 2014
So if you are putting together sanitary process lines that don’t require BPE type surface finishes or merely require 304 stainless steel do have to use ASME PBE fittings if you want orbital welds? Often not. We have studied standard sanitary weld fittings and hope to bring some clarity as to their suitability to be orbitally welded.
January 31, 2014
This blog post will address what animal components are used in the production of single use bioprocessing equipment, why it is important that animal derived components are avoided where possible, and what products are currently offered in ADC free versions.
January 30, 2014
One of the worst low NPSH applications is CIP return where the fluid to be pumped often has a lot of entrained air and foam.
What Our Customers Have to Say…
“Holland will put in the time and effort up front to fully comprehend complex processes, resulting in a system that meets, and frequently surpasses, expectations.”
Process Engineer – Pharmaceutical Contract Manufacturer
“Holland has been a reliable partner for many years. They have the ability to support our business thru their vast inventory of repair components, onsite field service and new replacement components. Holland has been proactive in providing recommendations for repair kits as well as carrying safety stock at their facility to support our specific needs.”
Operations Manager – Food Processing Facility
“Holland understands our need for not only quality products, but the detailed documentation and material traceability required in the pharmaceutical industry. We’ve used their Document Locator tool to help manage documentation for our production equipment. It’s been great to have a historical record of documentation covering our long-term relationship.”
Quality Manager – OEM of Single Use Biotech Equipment
““Holland Applied is a business partner that I find to be highly trustworthy, competent, and customer focused. We keep using them for our machining and fabrication needs because we know we can rely on them to provide high-quality goods on time and at competitive market prices.”
Head of Procurement – Injectable Drug Manufacturer
It’s Easy to Get Started
Need a Quote?
Tell us more about your project and challenges you’re facing, we’ll create a custom solution.
Need Expert Advice?
Learn more about how Holland can add value, functionality and reliability to your products.
