Passivation and electropolishing are two widely used finishing operations within our industry. Not knowing their differences often leads to confusion [...]

As the sole Quattroflow distributor for the greater Midwest, Holland Applied Technologies is pleased to announce the launch of the [...]

At Holland, we’ve been serving the high purity process industries for over 100 years. Over that time, we have become [...]

Holland Applied Technologies is very excited to announce that we are now the sole authorized distributor for PSG Dover’s Quattroflow [...]

Today, Holland Applied Technologies is excited to announce a new product developed with Princeton University- the CIJ and MIVM nanoprecipitation [...]

In today’s post we are going to look at our valve control top offerings . StoneL is a global leader in [...]

Our last blog post we looked at a case study where we were seeing a lot of slip in a [...]

In today’s post we are going to take a look at the Gore Sta-Pure peristaltic pump tubing. The Gore Sta-Pure [...]

In today’s post, we are going to focus on welding and what makes a weld sanitary in today’s sanitary (hygienic) [...]

Below is a comprehensive graphic for surface finishes that we hope you find useful. The Surface Roughness Conversion Chart will [...]

Many people have heard the term ‘ASME BPE’ when buying fittings and tubing for the Biotech and Pharmaceutical industry.  If [...]

This post will focus on proper weld documentation specifically weld logs and weld maps- what they are and what information they provide.

Today’s post will take a look at one of the most common sterilization methods for single use assemblies, gamma irradiation, and what standards and methods should be followed to call something “sterile”.

We’ll talk about a recent tangential flow filtration application and how Holland was able to leverage our unique design and build skills to provide a drop in replacement for process pump that just wasn’t up to par.

So what is done with WFI after it is produced to ensure the water stays at water for injections quality? It either needs to be used quickly (usually same day) or put in a state that allows it to maintain its efficacy.