• September 22, 2022

    Waukesha's traditional "Can-Do Sanitary Pump." Versatile in application, its reliability has made it the industry standard worldwide for more than 50 years.

    And to support this great product line, Holland carries America's largest inventory of Universal 1 Pump Parts!

  • September 28, 2022

    The Universal 3 Series is the latest addition to the Waukesha positive displacement pump family by SPX FLOW. It offers a front loading seal design with no bearings in the product zone. Operating pressure capacities up to 500 psi (34.5 bar) and standard 316L stainless steel body and cover makes this an attractive hygienic pump option for your most challenging applications in the food and beverage industry. Assembled and tested in Delavan, WI with “Waukesha 88” non-galling rotors and a standard 304 stainless steel gear case provides an ideal fluid transfer solution that is able to withstand the rigors of daily processing environments.

  • September 28, 2022

    In addition to the proven operation and durability of the Waukesha Universal Series Pump, the Waukesha Universal 2 pump includes advanced sanitation technologies, long life features and installation flexibility.

    And to support this product, Holland also carries America's largest inventory of Universal 2 Pump Parts.

  • September 28, 2022

    The APV R Series Pump is ideal for the type of application where the metal rotored pump will not work effectively. When you need to strip clean your pump because the product will not wash out by using a normal CIP process such as meat processing, the R pump overcomes this problem by its simple robust design. The R pump design utilises a floating rotor without rotor nuts. APV R Series rotors are interchangeable and can only be fitted in one position due to a specially modified square shaft. This simple and robust design allows for all sanitary parts to be changed in minutes without removing the pump from the line. The pumps are now fitted with an 'O' ring front cover gasket, making the routine maintenance even easier.

    APV uses multi-lobe rubber rotors (twin lobe on the RO) as standard. These deliver very high efficiency for the handling of a wide range of difficult and abrasive products.

    As a strip clean unit the APV R Series pump has simple front loaded rubber lip seals for easy replacement. For special applications a range of metal or plastic rotors in several different profiles can be supplied, which are ideal for abrasive or corrosive products. APV R Series pumps can be fitted with enlarged rectangular inlets for metal and dough slurries. Additionally, if entrapped air is a problem, special de-gassing front covers can be used, enabling entrapped air to be removed prior to cooking or processing. If you have a problem with fitting a pump beneath your tank or hopper a front cover outlet can be supplied. For higher discharge applications a cover with outrigger bearings is available.

    APV R Series Pumps can be supplied with a variety of drive units, or complete with hoppers or auger feed units.

  • November 24, 2022

    Waukesha Sanitary Universal lobe sanitary stainless steel positive displacement pumps feature bi-directional flow with a free draining internal flat profile pump body. Uniquely designed Waukesha "88" alloy rotors permit running at tighter clearances and higher efficiencies. Fully CIPable, the lobe pump body offers an alternative to higher priced external circumferential piston sanitary PD pumps.

  • November 24, 2022

    The Axiflow Technologies STS Standard Series of pumps consists of four (4) primary pump sizes. Axiflow pumps have a variety of screw pitches which gives you the flexibility to customize each pump specifically for your application. The smallest STSC50 size is only available is a C-face connection. The STS70, STS90, and STS125 are available in both C-faced connection or bare shaft with coupling.

    All standard series pumps are available in standard 3A and EHEDG design as well as aseptic design. Pressure ratings on the standard series pumps range up to 525 PSI differential depending upon screw pitch and pump size.

    Axiflow Technologies offers a C-face motor connection for most pump designs and sizes. This makes the motor self-aligning and gives you a smaller footprint.

  • November 24, 2022

    Twin screw pump technology has been around a long time, but only recently has this technology been used in sanitary pump applications. In the right application, they offer some compelling advantages over other types on sanitary PD pumps.

    Waukesha has taken the knowledge gained from years of experience building sanitary PD pumps and applied it to sanitary screw pumps. The result is the Universal TS Series pump. These new pumps have a of features and benefits of other sanitary screw pumps, plus some features and benefits only Waukesha can provide.

  • November 24, 2022

    Designed for heavy-duty, high-efficiency applications, the Waukesha 200 Series sanitary centrifugal pumps provide exceptional corrosion resistance. Impeller and shaft are one piece, which connects directly to motor shaft; eliminating such problems as vibration, short bearing life, high NPSH requirements, high seal maintenance, poor tolerance, and adverse operating conditions.

  • November 24, 2022

    The versatile Waukesha C Series close-coupled sanitary centrifugal pump offers strong performance and competitive price/value within the lower spectrum of heavy-duty, centrifugal pump applications. Waukesha C series sanitary centrifugal pumps can be installed in a series without fear of seal failure from elevated inlet pressures, even with viscous products.

  • November 24, 2022

    The APV W+ pump series is based on a unique hydraulic design that ensures maximum efficiency, allows for the highest hygienic standards and reduces noise and vibration. The W+ range consists of 16 standard models with pressure and flow capacities to 217psi and up to 1,760gpm. A number of special versions are available, including the Wi+ inducer pump for low NPSH applications and the Ws+ self priming unit designed to handle CIP return and other fluids with entrained air and foam.

  • November 24, 2022

    The Colder DrumQuik® is an easy-to-use product for extracting high purity chemicals from rigid containers (jerry cans, drums and IBCs) using common pumps within a closed system design. Using a closed system virtually eliminated the chance for hazardous spills or emissions release, providing a cleaner and safer work environment as well as eliminating the chance of spills of costly fluids.

    Once installed, connect the DrumQuik system to any pump and you have a safe, economical closed system to pump out your drums or totes. We can provide the DrumQuik by itself or an entire system including the hoses and pumps.

  • November 24, 2022

    Graco’s SaniForce drum unloaders can evacuate medium to high viscosity products from their original 55 gallon containers in less than 5 minutes, without diluting the material. The modular design of the Graco systems allow a great amount of flexibility when building a system. Graco’s options allow you to configure you own system. Options include:

    • Stainless steel or epoxy coated carbon steel frames

    • Stainless steel enclosed or open controls

    • A choice of 3 different piston pumps or 2 different diaphragm pumps

  • November 24, 2022

    Graco bin evacuation systems will empty viscous products from 300-gallon (1,135 l) containers without dilution

  • November 24, 2022

    Graco’s SaniForce drum unloaders can evacuate medium to high viscosity products from their original 55 gallon containers in less than 5 minutes, without diluting the material. The modular design of the Graco systems allow a great amount of flexibility when building a system. Graco’s options allow you to configure you own system. Options include:

    • Stainless steel or epoxy coated carbon steel frames

    • Stainless steel enclosed or open controls

    • A choice of 3 different piston pumps or 2 different diaphragm pumps

  • November 24, 2022

    Graco bin evacuation systems will empty viscous products from 300-gallon (1,135 l) containers without dilution.

  • November 24, 2022

    Graco’s SaniForce air-operated diaphragm pumps not only have flow rates up to 25% greater than many competitive pumps with PTFE diaphragms, but have one of the best, most durable, lubefree air valves in the industry. Ideal for applications requiring high flow rates and portability, Graco’s dependable diaphragm pumps offer a wide range of food-grade elastomers including Santoprene, PTFE, and overmolded EPDM/PTFE.

    Graco’s SaniForce High Sanitation (HS) models have an electropolished 32 Ra finish of a quick knockdown design. All models disassembled in five minutes or less.

  • November 24, 2022

    Graco’s powerful line of sanitary piston pumps move extremely difficult materials when others cannot. They have pressure ratios up to 12:1 and are ideal for low to high viscosity products up to 100,000 cps. The Graco Merkur® air motors improve serviceability, increase efficiency and offer a lower cost of ownership. The quick knockdown lowers are made with 300 series stainless steel for long-lasting durability and portability.

  • November 24, 2022

    The BH Sanitary Pump is employed in the food products, pharmaceutical, cosmetic and chemical/biochemical industries for sanitary applications and optimal cleaning. The important capabilities include, the continuous, pressure-stable, gentle and low-pulsation pumping and metering in proportion to speed. The block pump construction with flanged drive is particularly compact and economical to operate.

    Various different regulatory bodies have set specifications for a hygienically correct configuration of components and machines, as well as for component cleanability. The materials used are approved by the FDA (Food and Drug Administration) as well as EU-VO 1935/2004. In addition, the Hygienic and Aseptic Pumps meet the specifications of the United States’ 3-A Sanitary Standards and are GOST-R certified (a Russian certificate of conformity).

  • November 24, 2022

    Conveying and cutting in one process step without expensive additional equipment, this is exactly what the hopper pump with integrated cutting device makes possible. With the progressing cavity pump, for example in the food industry, large solids such as pieces of fruit or vegetables can be easily and quickly chopped and pumped for further processing.

    The BO/SO progressing cavity pump with hopper and coupling rod with feeding screw and force-feed chamber is employed in almost all branches of industry to provide continuous, pressure-stable, gentle and low-pulsation conveyance. The hopper housing with cutting unit guarantees optimum feed of chunky medium into the conveying elements. If the medium passes the force-feed chamber with the cutting unit the larger fruits and vegetables are cutted immediately. This unit consists of a rotating knife with three blades and a variable number of stationary knives adjustable to the size and consistency of the particles. Optionally the pump can be equipped with an additional cutting unit at the discharge flange of the pump. With its perforated disc and rotating knife it allows for further fine definition of the particle size. As any other progressing cavity pump also the BO/SO pump has the ability to dose the conveyed media in proportion to rotation speed. In block construction with a flanged drive, this pump is particularly compact and economical In addition, the pump is characterised by low investment, operating and maintenance costs. However, it is also available in bearing block design with a free shaft end. This means that the pump can be operated with different types of drive, such as servo motors, diesel engines or hydraulic drives.

  • November 24, 2022

    The RF pump is a flexible impeller pump. Due to the design, these pumps are reversible, self-priming and can suck from a maximum height of 5 meters. This type of pump is designed to pump products of both low and high viscosity as well as products containing particles or gases.

    The main applications are transfer of dairy products, edible oils, wine and beverages in general.

    Due to the eccentric shape of the pump housing, a vacuum is created in the suction side that enlarges the volume between the blades and this causes the product suction.

    The rotor is spinning and the product is carried from the suction side to the discharge outlet. Due to the eccentric shape of the pump housing, at the discharge side the blades bend, reducing the volume between them and causing the discharge of the product.

  • November 24, 2022

    The Waukesha W60 Series sanitary single seat valves are the ultimate in easy cleaning, high pressure, low maintenance design. With 16 standard sanitary bodies, 12 different actuators, 5 stem types, and a wide range of control tops, the valves can be configured to precisely fit any application.

    Materials

    Product Wetted: ASTM 316L (UNS-S31603); (DIN-1.4404)

    Non-Product: : ASTM 304 (UNS-S30400); (DIN-1.4301)

    Seat Material: : Tef FlowTM (Std) , Options: EPDM, FKM, stainless steel, TFP

    Surface Finish: : 32Ra (<0.8 ?m, higher finishes are available

  • November 24, 2022

    The Waukesha W68 Series sanitary valve familty of "throttling or pressure control" valves are the ultimate in: easy cleaning, high pressure, low maintenance design. With 11 standard sanitary bodies, 12 different actuators, 4 stem types, flush or standard adaptor, and a wide range of control tops, these Waukehsa valves can be configured to precisely fit any application

  • November 24, 2022

    The Waukesha W70 line of sanitary mix proof valves offers an economical solution to a wide variety of mix proof processing applications. Flow of two different media through the same valve simultaneously, without the potential for mixing, provides increased operating efficiencies and significant production cost savings.

  • November 24, 2022

    The Waukesha W70 line of sanitary mix proof valves offers an economical solution to a wide variety of mix proof processing applications. Flow of two different media through the same valve simultaneously, without the potential for mixing, provides increased operating efficiencies and significant production cost savings.

  • November 24, 2022

    Waukesha Cherry-Burrell brand W45 Check Valves are 'wafer-style', where product flow pushes the valve disc away from the seat. In the absence of forward flow pressure, the electropolished spring returns the disc and holds it closed against the seat. Back flow pressure also pushes the disc into the closed position.

  • November 24, 2022

    Waukesha Cherry-Burrell brand 45BY Ball Check Valves have a 316L stainless steel body with a curved offset ball trap. Product flow pushes the ball up into the trap and out of the product stream for full diameter flow.

    This check valve is well suited to applications where there is pulsing flow and should not be used for sticky, adhesive products, or those with excessive viscosities where the ball can be held in the offset tube.

  • November 24, 2022

    Waukesha Cherry-Burrell brand 62B Air Blow Check Valves are 'plug-style', where air pressure pushes the bonded rubber plug away from the seat. In the absence of air pressure, the spring returns the plug and holds it closed against the seat.

  • November 24, 2022

    Waukesha Cherry-Burrell brand 45HMP Check Valves are 'wafer-style', where product flow pushes the valve disc away from the seat. In the absence of forward flow pressure, the electropolished spring returns the disc and holds it closed against the seat. Back flow pressure also pushes the disc into the closed position.

  • November 24, 2022

    The Waukesha 60R series sanitary relief valve is a versatile, manually-adjustable Relief Valve for pipeline protection. Durable, compact, and easy to operate.

  • November 24, 2022

    Compact and mounted in an S-Line Clamp Connection, the 16AMP-AR relieves air/vapor pressure and is most commonly used on the inlet of a Centrifugal Pump so when the pump is operating, the valve is sealed by the low suction pressure. However, when the pump is "air locked," the pressure increases and the valve opens to let the air out of the system.

    Comprised of a Nylon poppet valve with a Buna O-Ring seal, the valvescan be supplied with 304 Stainless Steel, or 316L Stainless Steel cap bodies.

  • November 24, 2022

    For installation on pump suction lines, the 40CF-AR Sanitary Air Vent Valve is designed to operate as a CIP return air relief, and operates against either vacuum or positive pressure. For proper operation, the valve should be mounted vertically.

    • The Waukesha 40CF-AR is available in 1"-4" sizes. S-Line connections are standard. Other connections are available on request.

    • The 40CF-AR has a polypropylene ball that acts between the upper and lower machined seats. The valve body is machined stainless steel, either 304 or 316

    • Buna gaskets or FKM.

  • November 24, 2022

    VNE Sanitary Butterfly Valves offer great durability and ease of use for a wide range of services. Easy to install and maintain, butterfly valves close under pressure to form a leak-tight seal.

  • November 24, 2022

    The SVF Series SB9 sanitary ball valves are the newest member to our CleanTECH™ family. These valves are an ideal, competitively priced solution for manual and automated ball valve requirements in semiconductor, food & beverage, dairy, flavorings, cosmetic and fragrance applications.

  • November 24, 2022

    Ball valves offer great economy and durability for a wide range of applications that do not require clean-in-place (CIP) service. They are easy to install and maintain. The full ported, straight-through design of ball valves frees the flow path from obstructions. As a result, pressure drops across the valves are reduced, and there is no change in elevation for piping through the valve. This allows efficient and safe production or cleaning processes in the food, beverage, dairy, industrial, and chemical industries.

  • November 24, 2022

    SVF offers the premier sanitary ball valve for the Biopharmaceutical Industry. CleanFLOW ball valves are engineered to be a true process piping component to specifically meet the demanding processes found in the pharmaceutical industries. CleanFLOW sanitary ball valves are engineered and designed to specifically meet the demanding process where microbial, particle generation and contamination can threaten the outcome of the product. The “Tube-ID” port opening is dimensionally identical to the adjacent tubing to comply with ASME-BPE guidelines. SVF offers the premier sanitary ball valve for the Biopharmaceutical Industry.

    As a BPE-compliant product, CleanFLOW™ sanitary ball valves may be specified and installed plant-wide making the process of design, construction, startup and maintenance easier to manage while helping to minimize overall project costs.

  • November 24, 2022

    The Model C-CS* is a 316L SST self-contained pressure reducing regulator designed primarily for steam control in sanitary biotechnological process piping systems. The valve is capable of controlling outlet pressure between 10-75 psig (.69-5.2 Barg) with a max i mum inlet pressure of 150 psig (10.3 Barg).

  • November 24, 2022

    The Cashco Model C-PRV* valve is a 316L SST self-contained pressure reducing regulator designed for liquid or gaseous fluids utilized in sanitary biotechnological process piping systems. The valve is capable of controlling outlet pressure between 2-125 psig (.14 - 8.6 Barg) with a maximum inlet pressure of 175 psig (12.1 Barg).

  • November 24, 2022

    The Cashco Model 5381 is a stainless steel pressure reducing regulator designed to handle small to mid-capacity flow rates in sanitary biotechnical process piping systems. This valve is capable of controlling outlet pressure to a level between 5 and 200 psig (.34 and 13.8 Barg).

  • November 24, 2022

    The caschco Model C-BPV* is a 316L SST self-contained back pres sure/relief regulator designed for liquid or gaseous fluids utilized in sanitary biotechnological process piping systems. The 3/4"-3" valve is capable of controlling inlet pressure to setpoint levels between 2-125 psig (.14-8.6 Barg).

  • November 24, 2022

    The Model 3171 valve is a stainless steel back pressure relief regulator designed to handle small to mid-capacity flow rates in sanitary biotechnical process piping systems. This valve is capable of controlling inlet pressure to a level between 5 and 200 psig (.34 and 13.8 Barg).

  • November 24, 2022

    The Cashco Model SCV-30 * is a revolutionary, throttling, pneumatically actuated control valve. This unique design provides a geometrically characterized plug for superior throttling dynamics, plus the unit’s ease of cleanability and maintenance meet the requirements of sanitary control valves. The design incorporates a formed internal diaphragm that is bonded to a characterized metal plug. The diaphragm/body provides the smooth internal passages necessary for ease in cleaning and sanitizing. The plug head provides rigidity to the otherwise flexible diaphragm in the throttling zone where characterized control is desired.

  • November 24, 2022

    The Cashco Model SCV-S is a throttling, pneumatically actuated control valve. This design provides a geometrically characterized plug for superior throttling dynamics, plus the unit's ease of cleanability and maintenance meet the requirements of sanitary control valves.

  • November 24, 2022

    StoneL’s Eclipse® features dual solid state sensors with optional communications neatly integrated into a sealed module. The function module and trigger/indicator attach quickly and conveniently to standard VDI/VDE 3845 (NAMUR) actuator accessory mounting pads.

    The Eclipse® series is available in nonincendive and intrinsically safe versions (EN) for hazardous areas and in a general purpose completely sealed microconnector version (EG).

  • November 24, 2022

    The Quartz® is available in explosionproof (QX), nonincendive and intrinsically safe (QN) and general purpose (QG) versions. The robust epoxy coated anodized aluminum construction makes this platform extremely durable and well suited for use in corrosive, heavy wash down environments. A broad range of switching, position transmitter and communication options may be selected to accommodate most applications.

    This versatile platform adapts to a wide variety of valve systems. Attach the Quartz to quarter-turn actuators,manual operators, linear operators and positioners using readily available stainless steel mounting systems.

  • November 24, 2022

    Vena® SIL 650/V offers a perfect balance between its construction and flexibility and its pressure resistance. It is suitable for the transport by suction or impulsion of liquid, semi-liquid or solid products in the food, cosmetic, pharm and biotech industries.

    Its high flexibility and tight bending radius make it suitable for repetitive movements in dosing and filling machines. It is specifically designed to absorb vibrations and to compensate level differences.

  • November 24, 2022

    The Prism® PI integrates an advanced position sensing system and integral pneumatic control for sanitary diaphragm and other linear applications.

    Compact and durable, the PI is suited for corrosive, heavy washdown and hazardous areas.

  • November 24, 2022

    The Vena® SIL 630 is especially recommended for the transport of liquid or semi-liquid fluids in the food, cosmetic, chemical and pharmaceutical industries. It offers an extremely broad field of applications. It is recommended especially when the inner liquid has to be seen to control the flow.

  • November 24, 2022

    Sani-Tech® STHT®-WR Wire-Reinforced Silicone Hose

    Sani-Tech® STHT®-WR platinum-cured silicone, wire-reinforced hose, constructed of multi-ply reinforcement and 316L SS helical wire, provides unsurpassed flexibility while maintaining high-pressure ratings with full vacuum capabilities. Sani-Tech STHT-WR is manufactured with an ultra-pure, biopharmaceutical-grade silicone to ensure your process integrity.

    Characteristics

    The manufacturing process is carefully controlled from receiving through production. In all our production sites our tubing is produced and double bag packaged in an ISO 7 clean room. Inspection and lot traceability are readily accessible as batch numbers are assigned. All packages are identified by external labeling on both the bag and the highquality, crush-proof box. Saint-Gobain Performance Plastics’ manufacturing facility has the ability to create a variety of unique color-coding systems for your particular application needs.

    STHT®-WR available with custom coded coloring.

    Biocompatibility

    Sani-Tech® STHT®-WR is manufactured from the finest grade of silicone materials and

    is fully characterized, validated and tested to a variety of specifications including USP Class VI criteria, ISO 10993 and European Pharmacopoeia 3.1.9. Sani-Tech STHT-WR

    platinum-cured braid-reinforced silicone hose has a masterfile with the U.S. Food and Drug Administration.