The Anderson-Negele “TP” series pressure transmitter is a microprocessor-based sensor specifically designed for sanitary fluid process applications in the Life Sciences industry. This product provides an extremely high level of performance combined with the flexibility of digital communication via the “HART” protocol. The “TP” series can be specified in several configurations including high temperature models that are available in direct or remote mount variations. The high temperature direct mount is also recommended for applications where a horizontal orientation is re-quired for display viewing, such as tank tops and overhead lines. All models comply with UL, “intrinsically safe” requirements for Class 1, Div. 1, Groups A-D. The units may be ordered with any of our wide variety of sanitary process fittings.

The “TP” series simultaneously outputs an analog 4-20 mA signal while communicating digitally with a hand-held communicator or other “HART” host device. This allows configuration of parameters such as range, engineering units, tagging info, and other device specific information, from any accessible point in the output loop. The analog output can even be “trimmed” or calibrated while online, if required. Also retained are internal, non-interactive zero and span analog adjustments. This provides the user with the immediate performance enhancements of this new product, with future compatibility with the “HART” protocol. As with all Anderson-Negele sensors, the “TP” series is designed to be cleaned and steam sterilized in place. The optional LCD display can be factory scaled to linear process engineering units, mA output, or 0-100%.

Anderson’s "EL" Gauge was designed with one criterion in mind – reliability. Sanitary pressure gauges are subjected to repeated process and environmental abuse in the form of vibration, pulsation, harsh cleaning chemicals, wide temperature and humidity swings. It has been designed to be the toughest, most reliable gauge for any sanitary application up to 1,000 psig. With over 30 years of experience building and repairing hundreds of thousands of gauges from a dozen different suppliers, Anderson has identified and addressed all these key causes of premature failure in food, dairy, and beverage processing applications. What’s more, the “EL” has undergone the most extensive reliability tests of any Anderson product, both in the field on customer's toughest applications, and in accelerated tests that equate to years of constant pressure, temperature, and cleaning cycles.

The Anderson SR series transmitter may be ordered with built-in LCD indication. The unit meets all sanitary requirements for finish and cleanability in the food and beverage industry. It is designed and manufactured to withstand the harsh process and environmental conditions encountered in the food and dairy indsutries. Its one-piece stainless steel package design incorporates a transducer and electronic circuitry to convert pressure and/or vacuum to a proportional 4-20 mA signal. The wide variety of fittings and ranges provide flexibility in specifying the best transmitter for any application. The unit is designed to operate at high process temperatures and withstand CIP/SIP conditions. All units are supplied factory calibrated to standard, or custom ranges. For field maintenance, non-interactive zero, and span adjustments, as well as field accessible test points are provided. The optional LCD cap mounted display can be scaled to match actual process units, 0-100% of full scale, or 4-20 mA. This useful feature provides indication directly at the process, in addition to the standard 4-20 mA output.

The Anderson Digital Pressure Gauge platform is designed specifically for monitoring critical pressure applications in the Food, Beverage, and Dairy Industries. The product line was developed to address customer requirements for improved performance, safety, and readability of pressure indicators. The Anderson Digital Pressure Gauge provides a battery-powered, local display of pressure that is 6 times more accurate than its mechanical counter-part. Additionally, this product has 3 times the over-range capacity and 5-10 times the resolution of traditional mechanical pressure indicators. The switch version includes 2 fully adjustable switches with low-voltage relay outputs for simple control and/or alarming applications.

The Anderson Digital Pressure Gauge offers improved reliability over traditional gauges because it does not utilize mechanical actuation. Several other features have been incorporated that customers will find beneficial including a simple, tamper-resistant user interface for easy calibration and programming. The units are programmable for engineering units and all compound units boast auto-scaling to the appropriate units. There is also a “min/max” data capture feature that facilitates process and equipment troubleshooting.

The Digital Pressure Gauge is powered by two “AA” batteries and will operate up to a year before the “low battery” indicator comes on. The switch version operates continuously on DC loop power with battery back up possible to support off sight programming.

Pressure transmitter w/4-20mA and Hart output and optional display

Ever walk through a beverage facility and see small industrial style pressure transmitters with Tri-Clamps® on skids or vendor supplied equipment? If so, then you have probably seen OEM supplied transmitters failing due to lack of durability or moisture ingression. Anderson’s "HH" compact sanitary pressure transmitter for beverage and dairy is just the right replacement for harsh environments and tight piping clearances on OEM skids. Although designed to be an economical OEM replacement transmitter, the "HH" does not skimp on the traditional Anderson values of accuracy, long service life and rugged durability. As with the rest of the Anderson transmitter family the "HH" is sealed from the environment with fully potted electronics and a heavy duty welded stainless enclosure. Conceived from the onset as a sanitary transmitter, yet built to thrive in wet hostile environments, the "HH" is not just a shiny industrial sensor with a Tri-Clamp® welded or screwed on.

The "HH" is also designed for convenience. Beneath the o-ring sealed cover are test points allowing simple meter attachment to verify output without breaking into the loop. Conventional zero and span potentiometer provides intuitive calibration adjustments eliminating the need to study a manual or memorize menu sequences to confirm calibration. Wiring the "HH" to your loop is as simple as plugging a connector into the receptacle.

Simple, sanitary, rugged, and waterproof the "HH" extends Anderson’s Sanitary by Design concept into the realm of economical pressure transmitters.

The industry's first fully modular sanitary pressure transmitter offers not only best in class performance within harsh process environments, but also the ability to be custom configured onsite both for process parameters and enclosure form factor. Diagnostic routines continuously check on the health of the circuitry and measure the loop output current which is displayed on a highly visible internal LED screen. Patent pending dual seals at every enclosure penetration and a fully potted electronic puck assure long life and problem free operation.

The modular design and universal electronics puck significantly reduces cost of ownership as critical spare inventory is reduced to manageable, replaceable components. When accidents do happen, a damaged sanitary diaphragm is easily and economically replaced with a new stem. While the sensor industry trends toward cheaper designs with the inevitable reduction of durability, the MPF provides quality and value through innovation.

The model MPP modular sanitary pressure transmitter has been specifically designed for placement in sanitary process applications in the Life Sciences industry where accurate and repeatable pressure measurements in difficult (vibration, wide temperature swings, humidity) environments are required. A sanitary diaphragm on the process boundary acts on an FDA and USP approved actuating fluid transferring pressure to an internally sealed piezo resistive transducer. The transducer’s millivolt output is then converted an analog 4-20 mA DC-signal that is proportional to the pressure exerted on the diaphragm. The resulting signal may be interfaced with Anderson-Negele Digital Indicators, PLC or other customer supplied instrumentation. The MPP is sealed from environmental conditions via fully potted electronics, patented double o-ring sealed enclosure and all welded construction. Modular construction allows a high degree of field customization with the benefit of individual component replacement. All product contact surfaces are constructed of 316L stainless steel, (available Hastelloy) and electropolished with a surface finish not exceeding 8 micro inch Ra. Non-product contact surfaces are constructed of both 316L and 304.

Anderson-Negele's TSBA Modular RTD and Temperature Sensor is a compact, modular, individually configurable temperature sensor for food applications, processes, tanks and tubes. With its flexibility, performance and unparalleled reliability and durability, the TSB sets a new standard in temperature measurement.

The Flex-Hybrid technology with IO-Link and 4...20 mA combines the best of both worlds: Data can be transmitted in digital or analog mode.

Anderson-Negele's TSMA Modular RTD and Mini Temperature Sensors is a compact, individually configurable temperature sensor and RTD in mini housing for food applications, processes, tanks and tubes.

The Flex-Hybrid technology with IO-Link and 4...20 mA combines the best of both worlds: Data can be transmitted in digital or analog mode.

Anderson-Negele's SA modular series RTD offers an all stainless steel design with modular components providing maximum configuration flexibility. The modular elements can be mated with either the “mini” head for stand-alone RTD applications or the CT transmitter head for analog or “SMART” transmitter applications.

Anderson-Negele's SW modular series RTD elements can be supplied in both stand alone configurations or conduit wiring housing. Constructed entirely of 316L grade stainless steel with all product contact surfaces electropolished except well fittings.

All elements are provided with a permanently engraved stainless steel tag and a certificate of calibration and conformance.

Anderson-Negele's FH Standard DTG Digital Temperature Gauge operates on field replaceable batteries and can be ordered with / without a secondary 100 ? 3-wire RTD. The FH DTG is a cost-effective replacement for any mechanical thermometer from bi-metals to mercury-in-glass and the large LCD display makes viewing in process easy. A secondary RTD is ideal in applications that require a local indication and remote recording.

Anderson-Negele's FJ DTG Digital Temperature gauge is specifically designed for Pharmaceutical and Biotech applications. The FJ DTG operates on field replaceable batteries and can be ordered with / without a secondary 100 ohm 3-wire RTD. The large LCD display makes viewing in process simple. All elements are provided with a permanently engraved stainless steel tag and a certificate of calibration and conformance.

The Anderson-Negele L3 Pressure and Level Transmitter has been designed to measure process pressure or hydrostatic level in sanitary process applications. The state-of-the-art temperature compensation reduces errors associated with process temperature changes with improved zero stability reduces sensor interaction. The graphical user interface makes set-up and programming easy by directly aligning to the HARTTM DD menu structure. The field repairable and reconfigurable design allows the user to change the display orientation, add a remote cable, or replace a component in the field without impact to accuracy.

Hundreds of customers have proven for themselves that the Anderson's dual-diaphragm technology level transmitters are the clear choice for monitoring liquid inventory levels in virtually any atmospheric storage application. But, what about:

Level applications where bottom access is not available?

Sterile applications where a seal in the product contact zone is not preferable?

Ball-float sensors that can't measure to the bottom of the vessel?

Other top-mount solutions that fail unexpectedly due to probe coating, lack of conductivity, and mechanical failure?

For these tough applications, Anderson now offers the "LA" series of top-mount level transmitters. The design is based on our proven "SX" platform which provides the industry's best accuracy, temperature stability, and reliability. The "LA" is simple to specify, install and calibrate. It easily replaces problematic devices such as ball floats, pneumatics, capacitance probes and magneto-strictive sensors. It pays for itself almost immediately by providing more accurate fill levels with less downtime for cleaning and maintenance.

The LB Point Level probe assemblies are designed to provide long-term reliability in applications where they are continuously exposed to wide temperature swings and repeated CIP cycles. The LB utilizes a new process developed to seal Teflon® insulation to stainless steel probes providing a smooth, thick, permanent coating that’s impervious to conditions encountered in sanitary processing and CIP applications. To simplify installation the LB incorporates an elastomer between the Teflon® and the probe that allows any probe to be shortened by up to six inches in the field. The level switching modules are connected to the probes via a water-tight Quick Disconnect.

The LB also features a second proprietary, elastomeric compression seal at the top of each probe to insure a sanitary seal is maintained at the probe to fitting junction. No threads exist within or near the product contact zone. Finally, the LB integrates a stainless steel wiring head that simplifies field wiring and retrofits to existing electronic controls. The head and fitting assembly can support up to 4 individual probes, plus a separate tank reference connection. The housing includes a pre-wired and sealed quick disconnect receptacle and can be specified with a molded cordset. The quick disconnect even meets NEMA 4X requirements in the disconnected position.

Andreson-Negele's NSL-F is the next generation of potentiometric technology. In addition to all of the benefits of the LN, the NSL-F offers an optional display, and does not require tuning to process media but offers advanced configuration through a PC interface or the display. The NSL-F can also be repaired in our facility and is offered in custom factory bent configurations. Additionally, the NSL-F can be ordered with an insulated tip which allows anchoring of the rod to a tank bottom for applications with heavy agitation.

The NSL-F Potentiometric Level Transmitter provides accurate reliable measurement in applications involving viscous media or foam. While Anderson-Negele’s hydrostatic level technology provides proven accuracy and reliability in atmospheric inventory tanks, applications such as filler bowls and other shallow vessels, pressurized tanks and environments with wide temperature swings can prove challenging for pressure based level systems. Utilizing potentiometric technology, the NSL-F excels in these traditionally difficult applications. Fast reacting, the NSL-F samples interior level at ten times per second allowing accurate readings while filling or dispensing product.

The stainless steel enclosure is also built to withstand the rigors of harsh environments. Resistance to vibration and moisture from wash downs is handled with typical Anderson rugged construction. The water tight and reliable quick disconnects round out this dependable design. As with all Anderson-Negele level transmitters, the NSL-F is third party verified to 3-A standards and is backed by a one-year warranty.

The "HB" has been specifically designed for use in simple level control applications such as balance tanks and CIP vessels. We understand the harsh environment typically encountered in such applications and have designed this product to stand up to direct wash-downs and wide variations in temperature. The sensor is available in three ranges for tanks 20” to 60” (“low range”), 60.1” to 100” (“mid range”) and 101" to 160" (“high range”). Connections includes a 2” Tri-Clamp® and all sensors are supplied with up to 100’ of sealed, shielded cable (25’ is standard). Internal compensation allows the transmitter to perform at temperatures up to 200° F (93° C) and withstand cleaning and sterilization to 250° F (121° C).

Hundreds of customers have proven for themselves that Anderson's dual-diaphragm technology level transmitters are the clear choice for monitoring liquid inventory levels in virtually any atmospheric storage application. But, what about:

Level applications where bottom access is not available?

Rotating filler bowls that make bottom mounting impractical?

Wide temperature swings that cause other sensors to shift uncontrollably?

Other top-mount solutions that fail unexpectedly due to coating, lack of conductivity or mechanical failure?

For these tough applications, Anderson now offers the "LD" series of top-mount level transmitters. The design is based on our proven "SL" platform which provides the industry's best accuracy, temperature stability, and reliability. The "LD" is simple to specify, install and calibrate. It easily replaces problematic devices such as ball floats, pneumatics, capacitance probes and magneto-strictive sensors. It pays for itself almost immediately by providing more accurate fill levels with less downtime for cleaning and maintenance.

Anderson-Negele’s "SL" Level Transmitter is the latest innovation for measuring liquid level in sanitary applications. The "SL" Transmitter incorporates state of the art design to provide superior accuracy and long term signal stability. The field tested performance of the "SL" transmitter means the elimination of expensive, repetitive re-calibrations along with protection against costly overflow/run-dry situations that can occur with less stable level transmitters. The 0.2% accuracy experienced at installation can now be expected a year later!

We’ve also incorporated a field calibration feature that provides “one-touch” sensor zeroing as well as simple range calibration, without the need for special tools and fixtures, pressure sources, or removal of the transmitter from the tank. This translates to real cost savings during installation or when adjusting for new application requirements. With the addition of our standard quick disconnect receptacles; we have even extended our two-year warranty to cover water ingression.

The Level Switch (LS) point level detector is designed to provide reliable point measurement in a compact sensor suitable for a broad variety of applications and installations. Particularly suited for detection of water based (>25%) liquid media in vessels or pipes, the LS excels in foamy or viscous applications. Utilizing RF capacitive technology, the LS detects changes in the dielectric constant from air to detected media. Fast reacting, the LS will detect changes in state in less than one second. Featuring a dielectric threshold adjustment, sensor sensitivity may be selected to accommodate a broad range of media while eliminating false readings. The LS is also equipped with a status LEDs and available with an optional windowed cover allowing local indication of sensor condition simplifying startup and diagnostic procedures. A simple three wire connection allows power and signal to connect directly to a PLC without the need for an external relay module. Standard Anderson quick disconnect eases installation by utilizing three conductor cable. The receptacle even maintains NEMA 4X water tight protection when disconnected. Finally the stainless steel enclosure is designed to protect from the rigors of frequent wash downs and vibration.

The Liqui-Track 800 can be ordered with one or two input modules to accommodate four or eight tanks and multiple output options. Available communications protocols include: Ethernet, DH-485 & RS232 standard.

Anderson Instrument Company introduces its latest innovation for measuring liquid level in sanitary applications - the "SX" Level Transmitter. This line of sensors provide superior signal stability. The field tested performance of the "SX" transmitter means the elimination of expensive, repetitive re-calibrations along with protection against costly overflow/run-dry situations that can occur with less stable level transmitters. The 0.2% accuracy experienced at installation can now be expected a year later!

We've also incorporated a new field calibration feature that provides "one-touch" sensor zeroing as well as simple range calibration, without the need for special tools and fixtures, pressure sources, or removal of the transmitter from the tank. This translates to real cost savings during installation or when adjusting for new application requirements.

Of course the "SX" Transmitter is available in all standard fitting and range combinations you'll need to fit any sanitary tank application. All variations are CE compliant, meet Intrinsically Safe requirements, 3-A Sanitary Standards, and are backed by a 2-year warranty.

The BioProTT™ FlowMeasurement System consists of a flow sensor, the Clamp-On Transducer, and an electronic evaluation system, the flow meter. It is available in different variants with standard interfaces which allow an optimal integration into automated environments.

The function is based on the ultrasonic transit-time method and works non-invasively, meaning there is no direct contact with the medium — making it particularly suitable for processes with strict hygienic requirements.

Innovative design coupled with established and reliable technology for monitoring volumetric flow in real-time enables a truly compact, space saving solution. Our flow meters can be used with all sizes of our non-invasive BioProTTTM Clamp-On Transducers, and it is also possible to switch sensors and/or sensor sizes.

Electromagnetic inductive flow and volume measurement of media with a minimum conductivity >5 µS/cm | With IO-Link

The FMQ is an extrelemy versatile, robust and reliable flow meter for all conductive media. The performance spectrum is tailored to almost all applications, including batching and filling.

Sometimes a flowmeter offers more features and functionality than what is needed. It is often these applications that can be handled by a flow switch which provides a simple digital output indication of when the flow is above or below a user programmed set point. The FTS is Anderson-Negele’s offering for a sanitary 3-A approved flow switch. Unlike competitive products, the FTS-741 offers an all in one design where the clamp connection is one piece with the sensing element. This design eliminates a sealing point between the fitting and the sensor that adds to maintenance and sanitation concerns. It also simplifies ordering as one model number buys a complete sensor instead of having to remember multiple part numbers when ordering. So whether the application is CIP proof of return or controlling a heating circuit for a hot-fill application. The FTS will prove to be the right choice.

Holland Applied Technologies offers Emerson Micro Motion© H-Series coriolis mass flow meters. Ideal for hygienic process-control applications, H-Series flow meters are accurate, low frequency, fit-and-forget meters with a compact, drainable, cleanable design. Get reliable performance under extreme process conditions, including entrained gas.

The IZMAG is Anderson Instrument Company’s next generation of electromagnetic flow meter. Building on the qualities that have made it’s predecessor, the IZMS meter, the industry standard in accuracy and longevity, the IZMAG incorporates new design and performance features that allow the IZMAG to excel in the most demanding sanitary processing environment.

From the outside, one will recognize that a compact, all stainless steel housing now provides the highest level of protection from the cleaning chemicals and environmental extremes present in food processing facilities. A standard backlit graphic display provides the metering information not only as numbers and text but also has the ability to display images. By using images along with text a more intuitive feel to navigation is achieved making the programming experience quicker and simpler. On the inside a PFA liner offers increases in pressure, temperature and vacuum capability. This new liner gives the IZMAG the ability to satisfy an expanded list of high temperature and aseptic applications.

In addition to the other features the flow meter has a compact overall size allowing installation into tight fitting applications without a sacrifice in measurement performance.

The BC110 is a flow computer designed to take the pulse from a flow meter and provide a variety of functions based on it. The unit offers two configuration modes, one provides batch process control and the second is to function as a rate/totalizer. As a batch controller the BC110 offers 2 relay outputs for pump and valve control along with a sophisticated batch over-run correction to optimize the batch control accuracy. Utilizing the standard print capability the BC110 can not only control a batch, but also can be coupled to a printer to automatically provide documentation of the batch. When configured as a rate totalizer, the BC110 offers rate and total information for the measurement coupled with programmable function to the relay outputs to function as flow rate alarms or totalizer limits. Again, the print capability completes the typical totalizer operation by offering the ability to document the total. Other key features include three soft programmable inputs that can be used for remote operation of the reset, print, start ,or stop functions. The bright OLED alphanumeric display shows measured and calculated parameters in easy to understand format. Single key direct access to measurements and display scrolling is supported. An EZ Setup feature rapidly guides the user through the basic setup typically required for most applications. In addition to the control functionality the BC110 has a scaled pulse output and configurable 4-20 mA flow rate output. Beyond printing, the standard RS-232 Serial Port can be used for data logging, or for connection to a modem for remote meter reading.

Applications include ·ingredient batch process control, Rate/Totalization monitoring of product flow, and Totalizer with Print output for quantity tracking.

The SumoFlo® CPFM-8100-series Single-Use Coriolis Mass Flow Meter from Malema Sensors® is specially designed for measuring liquids in bio-pharmaceutical and other applications that require USP Class VI, USP 661, and USP 788, Gamma-sterilizable materials. SumoFlo® meters provide Mass Flow Rate, Total Mass, and Temperature with accuracy ±1% of reading.

Anderson’s HM-series turbine flowmeter is the solution for applications requiring an economical, accurate flowmeter. Using the proven method of counting the rotation of a turbine within a flowing stream of liquid, the “HM” turbine flowmeter is not merely a modification of an industrial design, but a design that was created specifically for the sanitary food and dairy industry.

Understanding these requirements has produced a flowmeter with superior durability in the unique applications found in that industry. An all 316SS construction (including rotor) coupled with a unique two piece design which eliminates the need for internal locking rings to retain the meters internals makes for a truly cleanable, hygienic design that also provides exceptional performance.

Non-magnetic sensing of the 316SS rotor eliminates the drag other magnetically sensed rotors experience which provides for better metering accuracy and greater longevity. The HM can handle aggressive products such as acids, vinegar solutions, brine, and de-ionized water

The BC110 is a flow computer designed to take the pulse from a flow meter and provide a variety of functions based on it. The unit offers two configuration modes, one provides batch process control and the second is to function as a rate/totalizer. As a batch controller the BC110 offers 2 relay outputs for pump and valve control along with a sophisticated batch over-run correction to optimize the batch control accuracy. Utilizing the standard print capability the BC110 can not only control a batch, but also can be coupled to a printer to automatically provide documentation of the batch. When configured as a rate totalizer, the BC110 offers rate and total information for the measurement coupled with programmable function to the relay outputs to function as flow rate alarms or totalizer limits. Again, the print capability completes the typical totalizer operation by offering the ability to document the total. Other key features include three soft programmable inputs that can be used for remote operation of the reset, print, start ,or stop functions. The bright OLED alphanumeric display shows measured and calculated parameters in easy to understand format. Single key direct access to measurements and display scrolling is supported. An EZ Setup feature rapidly guides the user through the basic setup typically required for most applications. In addition to the control functionality the BC110 has a scaled pulse output and configurable 4-20 mA flow rate output. Beyond printing, the standard RS-232 Serial Port can be used for data logging, or for connection to a modem for remote meter reading.

The AV-9000 microprocessor based recorder/controller offers: Four inputs recorded in four colors for enhanced legibility; Four additional inputs for indicating, control, switching and alarming; Four PID controllers assignable to any inputs; Prints its own scales and alphanumeric data all with no pen lag.

A key process value - do your operators have one? Is it easy to monitor? With the GK 1/8 DIN panel meters, featuring big, bright, color-changing displays, keeping track of it is even easier!

Analog input models for temperature, pressure, level, and flow as well as digital input models such as rate meters, indicators, counters and timers are available. These intelligent units offer multiple relay & alarm outputs, optional serial communication, and specialized functions on analog input units. With 13 models to choose from, the process value you require can surely be displayed. The minimum and maximum values along with total alarm time may be saved until re-set. In fact, your key process value will be displayed on the biggest and brightest 1/8 DIN display in the industry. The GK family features a 0.71” high LED (27% larger than ordinary 1/8 DIN units) with advanced, brilliant red, gallium arsenide technology. Not only is the display large and striking, but it can also change color. The display can be programmed to change from red to green or green to red at a preset value.

Easy programming makes these units even more desirable. All models are programmed via the front panel and are scalable to display inputs in engineering units. In addition to showing parameter values on the primary display, a help function can be utilized to show parameter descriptions. The secondary legend also indicates which value is shown on the primary display via a single digit character.

The Anderson-Negele AIC 801 controller is designed for use on virtually any process control application. With fully programmable inputs (RTD and 4-20 mA) and dual outputs standard, the unit can be quickly configured for temperature, pressure, level, or even flow control. The 4-20 mA primary output will throttle a valve or vary a pump speed to maintain the process at the desired setpoint, while the secondary relay output can signal any excursion beyond selectable limits.

The unit is now optionally available with an on-board 24 Volt D.C. power supply for use with any 4-20 mA transmitter input.

For field mount applications, specify the ED-190 controller package which includes the 801 pre-mounted in a NEMA 4X enclosure. A pre-wired and piped I:P transducer is included for applications requiring a 3-15 psig pneumatic output.

The AIC 200 is a 1/4 DIN microprocessor based, single loop controller. It will control a variety of processes including those requiring simple on-off to dual 4-20mA outputs with full PID. Thermocouple and RTD linearization are automatic. Thermocouple cold junction compensation is also accomplished automatically. Input type changes are easily made by an operator. The AIC 200 is designed to provide reliable operation in sanitary environments. An advanced input circuit design, an efficient switching power supply, and self diagnostics provide for a high degree of immunity to environmental electrical noise, reduce heat build-up, and increase instrument life. The AIC 200 is one of the easiest controllers to use with all operations and programming done with a minimum of keystrokes. The keypad features 3 large keys with tactile feedback that respond crisply even when an operator is wearing gloves.

With over 40 years of experience, Enerquip’s resourceful team can provide you with sizing and design selection assistance. Enerquip’s skilled sales engineers use state-of-the-art modeling software to recommend the right heat exchanger for each heating or cooling application. Your end result will be a high quality, sanitary heat exchanger with lead-times that are better than the industry average.

Top producers of food, beverage and dairy products put their faith in Enerquip, the leading provider of sanitary stainless steel shell and tube heat exchangers, for their critical heating and cooling needs. Enerquip is the number one supplier in sanitary markets consisting of the toughest operating and regulatory requirements.

That’s why the top two Clean-in-Place (CIP) suppliers in the US have standardized on Enerquip’s heat exchangers for their systems. They have been impressed with our quality and ability to consistently meet their sanitary requirements.

Thermaline stainless steel Shell & Tube heat exchangers are manufactured in accordance with ASME and TEMA standards.

Standard with a mechanical solid seal backed with a self energized o-ring ensuring years of uninterrupted service.

Masterflex tubing is specially formulated and extruded to provide the high performance and long life when used with a Masterflex peristaltic pump. Masterflex tubing is manufactured to tight tolerances of Masterflex® pump heads to ensure accurate flow rates and long tubing life. Masterflex tubing is optically inspected and factory tested—ensures clean, defect-free tubing that performs to specifications. Lot-to-lot consistency provides Manufactured to tight tolerances of Masterflex® pump heads to ensure accurate flow rates and long tubing life. Fourteen pump tubing formulations are available, each with different chemical compatibility properties, agency approvals, and performance characteristics. Norprene®, PharMed® and Tygon® formulations are the firmest offered; C-FLEX® and silicone are the softest. Firm tubing has longer life, better pressure generation, stronger vacuum/suction lift, and lower gas permeability than soft tubing .

Saint-Gobain's C-Flex® is a unique, patented thermoplastic elastomer tubing specifically designed to meet the critical demands of the medical, pharmaceutical, research, biotech and diagnostics industries.

C-Flex® biopharmaceutical tubing has been used by many of the world’s leading biotech and pharmaceutical processing companies for over 20 years. Each coil of C-Flex tubing is extruded to precise ID, OD and wall dimensions . All C-Flex tubing is formulated to meet the standards of the biopharmaceutical industry and is QA tested before leaving our production facility.

Saint-Gobain Performance Plastics has developed SaniPure BDF, a breakthrough innovation in high-performance polymer materials. SaniPure BDF is completely certified to be free of materials of animal origin and is the ideal choice for handling sensitive biological fluid transfer applications. SaniPure BDF combines the features of traditional silicone tubing with superior peristaltic pump life performance and low absorption characteristics. This tubing answers the industry’s requirements for performance, characterization and animal-free origination.

Saint-Gobain's crystal-clear Tygon S3 E-LFL tubing is formulated specifically for use in peristaltic pump applications. Tygon S3 E-LFL food & beverage dispensing tubing offers a long pump life not only at 0 bar but also at back pressure of up to 1,7 bar and is phthalate-free. Its peristaltic pump life performance at different back pressures is shown on the datasheet.

With its superior flex life characteristics, Tygon S3 E-LFL tubing reduces production downtime due to pump tubing failure. Tests have demonstrated reduced particle spallation, which eliminates the need for frequent downstream filter replacement and diminishes the risk of sensitive-fluid contamination. This is critical in pharmaceutical, high-purity chemicals, cosmetics and food applications.

PharMed® BPT biocompatible tubing is ideal for use in peristaltic pumps and cell cultures. PharMed® BPT tubing is less permeable to gases and vapors than silicone tubing and is ideal for protecting sensitive cell cultures, fermentation, synthesis, separation, purification, and process monitoring and control systems. PharMed® BPT tubing has been formulated to withstand the rigors of peristaltic pumping action while providing the biocompatible fluid surface required in sensitive applications. With its superior flex life characteristics, PharMed® tubing simplifies manufacturing processes by reducing production downtime due to pump tubing failure. The excellent wear properties of PharMed® BPT translate to reduced erosion of interior tubing walls, improving overall efficiency of filtering systems.

PharmaPure is a premium, low spallation, biologically compatible peristaltic pump tubing developed especially for pharmaceutical, biotechnology, and laboratory applications. This tubing meets the demanding challenges of providing unsurpassed pump life, with ultra-low particulate spallation and very low permeability. PharmaPure’s superior flex life characteristics simplifies the manufacturing process by reducing production downtime due to pump tubing failures. PharmaPure has low permeability and is ideal for protecting sensitive cell cultures, fermentation, separation, purification, process monitoring, and sterile filling.

GORE® STA-PURE® pump tubing is superior to all other available tubing. GORE STA-PURE pump tubing operates at pressures as high as 100 psi, lasts 70 times longer than silicone tubing, and has stable flow rates over its extended life. This enables continuous high-pressure pumping and less downtime from premature tube rupture. GORE STA-PURE pump tubing has passed USP Class VI and cytotoxicity testing.

GORE® STA-PURE® pump tubing is available in Series PCS (Silicone/ePTFE) for high pressure applications and Series PFL (Perfluoroelastomer/ePTFE) for aggressive chemicals.

Saint-Gobain's C-Flex® is a unique, patented thermoplastic elastomer tubing specifically designed to meet the critical demands of the medical, pharmaceutical, research, biotech and diagnostics industries.

C-Flex® biopharmaceutical tubing has been used by many of the world’s leading biotech and pharmaceutical processing companies for over 20 years. Each coil of C-Flex tubing is extruded to precise ID, OD and wall dimensions . All C-Flex tubing is formulated to meet the standards of the biopharmaceutical industry and is QA tested before leaving our production facility.

C-Flex Braided Tubing is an ultra-flexible, high-purity tubing product developed for use in applications where a thermoplastic tube is desired, but the pressure requirements exceed those allowable by a non-reinforced thermoplastic material. C-Flex Braided Tubing is manufactured with C-Flex formula 3, clear, animal derived component free (ADCF) resin and reinforced with polyester braid.